Beta

Research and Publications

Research Grants

1)Prof. Dr.S. M. Shendokar

Grants Overlooked :

i.   Research Grant of Rs. One Million from DMSRDE, Kanpur for project titled “Manufacturing of Panels of Plain and Complex Shapes using Composite Materials and Nanofibers (Electrospinning Method) by VARTM Process”, No. TR/0569/CARS-57.

Proposals Submitted :

ii.   Multi-Scale Characterization and Development of Bio-Functionalized Nanofibers, Bharati Vidyapeeth Deemed University, Research Seed Funding.
iii.   Multi-Scale Characterization and Modeling Facility Development, AICTE under National Facilities In Engineering & Technology with Industrial Collaboration (NAFETIC)
iv.   Design and Development of an Efficient Wave Energy Converter- A Pathway to Economic Prosperity of Wave Power

May 2010-Aug 2010 Post Doctoral Research Fellow, Centre for Advanced Materials and Date Smart Structures, NC A&T State University, Greensboro, NC,USA.

Research Projects:

Dispersion of Carbon Nanotubes using Electrospinning. Development of Impact Resistant Glass Fiber Composites. Development of Electrospinning setup for Mass Production of Nanofibers into a Role to make Nanofiber Prepregs. Flexural Characterization and FEM modeling of Epoxy Glass Fiber Composites Interleaved with Electrospun Nanofibers.

2007-2009

Graduate Research Assistant, Centre for Advanced Materials and Smart Structures, NC A&T State University, Greensboro, NC, USA.

Research Projects:

Manufacturing of Electrospun Nanofibers Using Tetra Ethyl Ortho-Silicate (TEOS) Sol-gel, Optimization of Electrospinning Setup and Process Parameters, Development of Glass Mold Manufacturing Process for Electrospun Nanofiber Infused with Epoxy Resin Composites, Manufacturing Composites Using Vacuum Assisted Resin Transfer Molding (VARTM, H-VARTM), and Prepregs, Characterization of Electrospun Nanofiber Interleaved Composites as per ASTM Standards, Thermo-Gravimetric Analysis (TGA), Differential Scanning Calorimeter (DSC), C-Scan, Programmable Furnaces, Factography using SEM, and Optical Microscopes. Stochastic Modeling of Electrospun fibers, Development of simplified unit cell approach for DCB modeling using Ansys. Estimation of homogenized properties of Epoxy TEOS nanofiber composites using Ansys. Dispersion of CNT’s using Ultrasonication and High Shear Mixer. DMA Characterization of CNT’s dispersed Epoxy specimen for Tg, Tensile Characterization of Epoxy specimen with varying dispersion of CNT’s.

Peer Reviewed Journal Publications

Prof. Dr. S. M. Shendokar
  1. A. D. Kelkar, R.V. Mohan, R.L. Bolick, S. M. Shendokar, “Effect of Nanoparticles and Nanofibers on Mode I Fracture Toughness of Fiber Glass Reinforced Polymeric Matrix Composites,” Materials Science and Engineering B, Vol. 168, (2010), pp. 85–89
  2. A. D. Kelkar, R.V. Mohan, R.L. Bolick, S. M. Shendokar, “Effect of Electrospun Fibers on the Interlaminar Properties of Woven Composites,” Journal of Advanced Materials Research, Vols. 47-50, (2008), pp. 1031-1034.

Referred Conference Publications

Prof. Dr. S. M. Shendokar
  1. S. M. Shendokar, A. D. Kelkar, “Comparative Study of Electrospun Nanofibers Vs E-Glass Microfibers Infused with Epon862/W Resin,” Proceedings of SAMPE 2010, Conference and Exhibition, Washington State Convention Centre, Seattle, Washington, May 18th – 20th, 2010.
  2. R. Mohan, A.D. Kelkar, N. Chinnannavar, S.M. Shendokar, “Modeling and Experimental Investigation on the Effect of Interlaminar Nanofiber Layers on the Delamination Behavior in a Epoxy Fiber Glass Composite,” 14th European Conference on Composite Materials”, 7-10 June 2010, Budapest, Hungary, Paper ID: 389-ECCM14
  3. S.M. Shendokar, A.A. Kelkar, Ron Bolick, “Effect of electrospun nanofibers on mechanical properties of Epon 862 – W”, The 18th Annual International Conference on COMPOSITES / NANO ENGINEERING - ICCE-18 Anchorage, Alaska, USA, July 4-10, 2010.
  4. S.M. Shendokar, A.D. Kelkar, R. Mohan, Ron Bolick, “Effect of Interleaved Electrospun Nanofiber on Flexural Properties of Fiber Glass Composites,” In Proceedings of ASME International Mechanical Engineering Congress and Exposition (IMECE 2010), 12th – 18th November, 2010, Vancouver, British Columbia, Canada.
  5. S.M. Shendokar, A.D. Kelkar, R. Mohan, Ron Bolick, “Parametric Investigations on The Effect of Electrospinning Process Variables on The Macroscopic Properties of Hybrid Composites,” Proceedings of ASME International Mechanical Engineering Congress and Exposition (IMECE 2009), 13th – 19th November, 2009, Lake Buena Vista, Florida, USA.
  6. S.M. Shendokar, A.D. Kelkar, R. Mohan, Ron Bolick, Gautam Chandekar, “Effect of Sintering Temperature on Mechanical Properties of Electrospun Silica Nanofibers,” Proceedings of ASME International Mechanical Engineering Congress and Exposition (IMECE 2008), Oct 31st – 6th November, 2008, Boston, Massachusetts, USA.
  7. Dr. S. M. Shendokar, Dr. Ajit Kelkar, Dr. Ram Mohan, Dr. Ron Bolick, “Influence of Electrospun Nanofibers on Interlaminar Performance of Glass Fiber Composites”, Nanocon 010, International Conference on Nanotechnology-Materials and Composites for Frontier Applications, October 17-18, 2010,Pune, India
  8. Dr. S. M. Shendokar, Mr. S. S. Chavan, Mr. P. V. Londhe, “Assessment of Electrospun Nanofiber Properties in Two Phase Composites”, International Conference on Nanotechnology-Materials and Composites for Frontier Applications, October 17-18, 2010, Pune, India
  9. Dr. S. M. Shendokar, Dr. Ajit Kelkar, Dr. Ram Mohan, Dr. Ron Bolick “Application of Electrospun Nanofibers for the Improvements in Mode-I Fracture Toughness of Fiberglass Composites”, ICONSET 2011, The International Conference on Nano Science, Engineering and Technology, Indira Gandhi Centre for Atomic Research (IGCAR), Sathyabama University, November 28th-30th, 2011, Kalpakkam, Chennai, India
  10. Dr. S. M. Shendokar, Mr. S.S.Chavan, P.N.Deshmukh, “Low Cost Manufacturing of 1-D Nanostructures Using Electrospinning”, An International Conference on PRECISION, MESO, MICRO, AND NANO ENGINEERING On December 10-11, 2011 at College of Engineering., Pune
  11. Dr. S. M. Shendokar, P.N.Deshmukh, Mr. N. K. Kamble, “Development and Analysis of ELectrospun Nanofibers for Filtration Applications”, Ist International Conference on Functional Materilas for Defense, 2012, ICFMD-2012, May 18th – 20th, 2012, Defence Institute of Advanced Technology, (Deemed University), Girinagar, Pune-411025

Conferences and Workshops organized

Prof. Dr. S. M. Shendokar

i. International Conference on Nanotechnology - Composites and Materials for Frontier Applications, Oct. 17th and 18th 2010, Le Meridian, Pune, India. For this conference, all activities associated with faculty at North Carolina A & T State University, Greensboro, USA and other foreign participants were coordinated.
ii. Workshop on “Designing Course Curriculum for M.Tech (Nanotechnology)”, All activities associated with participating researchers from all over India were coordinated. Total 18 distinguished researchers from the field of Nanotechnology attended this workshop. The inputs of researchers have been incorporated into the M.Tech (Nanotechnology) syllabus.

QIP/STTP Attended

QIP short term course on “Emerging Trends in CARBON NANOTUBES”, organized by Advanced Nanoengineering Materials Laboratory, Department of Mechanical Engineering and Materials Science Programme, Indian Institute of Technology, Kanpur, November 07-12th, 2011, Venue: ACMS Conference Room

List of Research Papers (National/International)

List of Research Papers (National/International)
Department Name of the Faculty Title of paper Name of journal Year of publication
Mechanical Engineering Dr. S. M. Shendokar Effect of Electrospun Fibers on the Interlaminar Properties of Woven Composites Advanced Materials Research 2008
Computer Engineering Prof .Patkar U.C SMART UTILITY FOR MSAS 2005 JERS 2010
Mechanical Engineering Dr. S. M. Shendokar Effect of Nanoparticles and Nanofibers on Mode I Fracture Toughness of Fiber Glass Reinforced Polymeric Matrix Composites Materials Science and Engineering B 2010
Applied Science Jyoti Atul Dhanke Intuitionistic Fuzzy Metric Space Using Concept of -Fixed Point Journal of Advanced Studies in Topology” (JAST) 2012
Computer Engineering Prof .Patkar U.C Generalize Approach for Conversion of English Multi format using RBM technique IJNGCA 2012
Computer Engineering Prof .Patkar U.C Automation testing in software organization IJCAT 2012
Computer Engineering Prof .Patkar U.C Transformation of multiple English text sentences to vocal Sanskrit using rule based technique IJCDS 2012
Civil Engineering H.H.Mehta Performance of hybrid anaerobic reactors for treatment of dairy effluent using different commercial packing media International journal of agricultural engineering 2013
Civil Engineering S T Rathod Progressive collapse analysis of Rc structure resting on sloping ground International Journal of Applied Science and Technology 2013
Civil Engineering V D Sable Study the effect oa addition of silica fume on properties of high strength concrete International journal of Engineering Research and Technology 2013
Civil Engineering V D Sable Non Linear finite element analysis of deep beam International journal of Engineering Research and Technology 2013
Computer Engineering Prof.Chate P.J. A fast clustering based feature based subset Selection algorithm for high dimensional data. IJIRS 2013
Computer Engineering Prof.Patil A.R. Estimating and Modeling web user Behavior: Survey Analysis IJERMT 2013
Computer Engineering Prof.Pawar S.S. Design of Ontology Based GUI Framework to Increase Usability of GIS Applications IJAIEM 2013
Mechanical Engineering Dr. S. M. Shendokar Assessment of Three Phase Nanocomposite with Electrospun Nanofibers International Journal of Science and Research (IJSR) 2013
Computer Engineering Prof .Ingole A.M. Credit Card fraud detection using hidden markov model and its performance. IJARCSSE 2013
Computer Engineering Prof.Kadam Y.V. A Study on Scalable Internet Traffic Measurement and Analysis with Hadoop IJECS 2013
Computer Engineering Prof.Pawar S.S. Active Image Authentication System (AIAS) IJECCE 2013
Computer Engineering Prof.Chate P.J. Presentation of Service oriented Bussiness thinking by using RPC AESJ 2013
Civil Engineering H.H. Mehta Performance evaluation of anaerobic hybrid reactors with different packing media for treating wastewater of mild alkali treated rice straw in ethanol fermentation process Journal of Bioresource Technology (a scientific journal published by Elsevier) 2014
Civil Engineering V.D Sable Experimental Study of fresh concrete properies of fibre reinforced with metakoalin International journal of Emerging Engineering Research and Technology 2014
Civil Engineering S T Rathod comparision of design and seimic behavior of RCC SILO International Journal of Science and Research (IJSR) 2014
Civil Engineering S S More "Signal free traffic Junction" A Planning Case study International Journal of Global Technology Initiatives 2014
Computer Engineering Prof.Patil A.R. Model 2 Implementation of Forecast System for modeling user’s web-browsing conduct IJERMT 2014
Computer Engineering Prof.Patil M.A. Security in Multi-Cloud Storage with Cooperative IJCSIP 2014
Computer Engineering Prof.Pawar P.D. Illustration of Completely Fair Scheduler for Task scheduling using AA Tree IJSETR 2014
Computer Engineering Prof.Pawar P.D. CFS for Addressing CPU Resources in Multi-Core Processors with AA Tree IJCSIT 2014
Computer Engineering Prof.Patil M.A. Security in Multi-Cloud Storage with Cooperative Provable Data Possession IJCSIT 2014
Computer Engineering Prof.Pawar S.S. Geo-Informatics-Ontology Model: Review One IJCTT 2014
Computer Engineering Prof.Kadam Y.V. A New Approach to Internet Traffic Analysis, Measurement, and Classification Using Hadoop ELSEVIER 2014
Computer Engineering Prof.Kadam Y.V. TAMC: Traffic Analysis Measurement and Classification Using Hadoop Map Reduce IJRITCC 2014
Mechanical Engineering S. V. Jaswandkar Design Improvement of Handle bar assembly of an automobile using FEA International Journal of engineering Sciences & Research Technology 2014
Mechanical Engineering D D Shinde A Review on heat transfer parameters using internal threaded pipe fitted with screw tape insert of different materials IJIERT 2014
Mechanical Engineering Dr. S. M. Shendokar Analysis of Flexural Properties of
Carbon Fiber Reinforced / E-Poxy
Composite Material
International Engineering Research Journal (IERJ) 2014
Computer Engineering Prof.Patil A.R. Implementation of Forecast System for modeling user’s web-browsing conduct IJERMT 2014
Computer Engineering Prof.Salunkhe S.P. Summarization and Hybrid Machine Translation System for English to Marathi: A Research Effort in Information Retrieval System (H-Machine Translation) Discovery Publication 2015
Computer Engineering Prof.Patkar U.C Ubiquitous computing: impact for intelligence system IJIR 2015
Computer Engineering Prof.Patkar U.C Paper battery the solution for traditional battery IJIR 2015
Computer Engineering Prof.Patkar U.C Blue brain technology to preserve intelligence IRJET 2015
Computer Engineering Prof.Chate P.J. Face Analysis for Improvised System Security using LASER Focus IRJET 2015
Computer Engineering Prof.Chate P.J. Wireless Charging And Data Collection In Sensor Network IRJET 2015
Computer Engineering Prof .Ingole A.M. Phishing Attacks and Its Preventions IRJET 2015
Computer Engineering Prof .Ingole A.M. GPU computing and its Application IRJET 2015
Computer Engineering Prof.Bala K. Li – Fi Technology, Implementations and Applications IRJET 2015
Computer Engineering Prof.Bala K. Augmented Reality and Its Technologies IRJET 2015
Computer Engineering Prof.Bala K. IOT Smart Health Band IJIR 2015
Computer Engineering Prof.Patil A.R. Next generation mobile Computing IJIR 2015
Computer Engineering Prof.Salunkhe S.P. First Survey Effort on Translation Systems IJETTCS 2015
Computer Engineering Prof.Kadam P.M. Inferring User Search Goals with Weakly Supervised Methodology. IJETTCS 2015
Computer Engineering Prof.Chate P.J. M-Health Application Overview IJIR 2015
Computer Engineering Prof.Chate P.J. Big Data Visualization: Challenges and SAS Visual Analytics IJCSMC 2015
Computer Engineering Prof.Patil A.R. Review on Data Merging and Data Movement to Perform Accelerate Hadoop System IJIRCSSE 2015
Computer Engineering Prof.Salunkhe S.P. A research work on English to Marathi hybrid translation system. IJCSIT 2015
Computer Engineering Prof.Salunkhe S.P. Summarization and Hybrid Machine Translation System for English to Marathi: A Research Effort in Information Retrieval System (H-Machine Translation) Discovery Publication 2015
Computer Engineering Prof.Bala K. Knowledge Models Framework using Topic Map IJCSMC 2015
Computer Engineering Prof.Patkar U.C Healthcare Analysis via Wireless sensor network IJSRSET 2015
Computer Engineering Prof.Patkar U.C IDS with honey bee server for secure communication in cloud computing: A Literature Survey Effort IJSRD 2015
Computer Engineering Prof.Patkar U.C IOT sensors and protocols IJSRD 2015
Computer Engineering Prof.Patkar U.C An innovative study on artificial intelligence and robotics IJIRCCE 2015
Computer Engineering Prof.Patkar U.C Database for artificial intelligence IJCSMC 2015
Computer Engineering Prof.Patkar U.C Artificial Intelligence Approaches in cyber security IJRITCC 2015
Computer Engineering Prof.Patkar U.C DNA computing and implementations IJRITCC 2015
Computer Engineering Prof.Patkar U.C 5G wireless architecture and technology IJARIIE 2015
Computer Engineering Prof.Patkar U.C Phishing Attacks and Its Preventions IJIR 2015
Computer Engineering Prof.Chate P.J. Panda: Public Auditing for Shared Data Integrity with Efficient User Revocation in the Cloud. IJSRD 2015
Computer Engineering Prof .Ingole A.M. Better Authentication method for mobile computing. GRDJE 2015
Computer Engineering Prof.Kadam Y.V. I Twin Technology IJIRCCE 2015
Computer Engineering Prof.Patil A.R. GPU computing with CUDA IJIK 2015
Computer Engineering Prof.Patil A.R. Face Recognition Technology IJSRET 2015
Computer Engineering Prof.Chate P.J. Raspberry Pi- The Innovative Technology IJIRCCE 2015
E&TC Engineering Prof. A.B. Wani HRV Analysis of Arrhythmias using Wavelet based on Statistical Parameters International Journal of Engineering Research & Technology 2015
E&TC Engineering Prof. S. S. Gawhale Wireless Handheld Visitor Guid and Tracking System for security Purpose International Journal of contemporary research in computer science & technology 2015
E&TC Engineering Prof. S. S. Gawhale Transmits beam forming and receiver design for MIMO Radar International Research Journal of Engineering & Technology 2015
E&TC Engineering Prof.L.P.Chaudhari Advanced Golden Hour Rescue system using Android International Journal of Engineering, Educational and Technology 2015
Mechanical Engineering S. N. Kadam A TAGUCHI APPROACH FOR OPTIMIZATION OF PROCESS PARAMETERES IN IJERGS 2015
Mechanical Engineering D D Shinde Experimental study of heat transfer parameters using internal threaded pipe fitted with screw tape insert of different materials IJIERT 2015
Mechanical Engineering S. N. Kadam EXPERIMENTAL AND COMPUTATIONAL THERMOACOUSTIC REFRIGERATION
INVESTIGATION OF LOW COST STANDING WAVE
THERMOACOUSTIC REFRIGERATION
IJMET 2015
Mechanical Engineering S.Y.Nagawase Parameters Affecting the Functioning of Closed Loop Pulsating Heat Pipe. A Review IJIRSET 2015
Mechanical Engineering D D Shinde Experimental study of heat transfer parameter of serrated plate fin heat exchanger for different materials IJIERT 2015
Computer Engineering Prof. Patkar U.C Transient Authentication for cloud data security IJSRSET 2015
Civil Engineering S C Patil Partial Relacement of cement by bagasse Ash International Journal of Resarch in applied science & Engineering Technology 2016
Civil Engineering S C Patil Net Zero Energy Building International Journal of Resarch in applied science & Engineering Technology 2016
Civil Engineering 1) D k Mokashi
2) U. S. Patil
Wind pressure distribution on triangular shape of Building model International Journal of Resarch in applied science & Engineering Technology 2016
Civil Engineering S T Rathod Performance of High strength self compacting fiber reinforced concrete beam under shear (P) International journal of Engineering Science and computing 2016
Civil Engineering 1) S S More
2) V D Sable
Cost Benefit analysis for signal free traffic at intersection: A case study International journal of Research in Engineering & Technology 2016
Civil Engineering Dhmankar S S Study of defluoridation using BPAC International Journal of Research in Engineering and technology 2016
Civil Engineering Patil U S Study of defluoridation using BPAC International Journal of Research in Engineering and technology 2016
Computer Engineering Prof.Patkar U.C Tracking and Recovery of the vehicle using GPS and GSM IRJET 2016
Computer Engineering Prof.Patkar U.C Model Survey on Policy Making for Software Defined Networks Cloud with Telecommuntication IJRASET 2016
Computer Engineering Prof.Bala K. CUDA: High Parallel Computing Performance IJRRCCE 2016
Computer Engineering Prof.Kadam Y.V. Survey on Hybrid Big Data Approach For Secure Authorized DE-duplication IJIRCCE 2016
Computer Engineering Prof.Kadam Y.V. Survey on Profit Maximization with Assured QoS in Cloud Computing IJIRCCE 2016
Computer Engineering Prof.Salunkhe S.P. Statistical Translation system for English to marathi using KNN & N-GRAM method IJIRSET 2016
Computer Engineering Prof.Patkar U.C Voice based examination system IJCSMC 2016
Computer Engineering Prof.Chate P.J. Stock market prediction and analysis using naïve bayes IJRITCC 2016
Computer Engineering Prof.Chate P.J. Research and survey of data mining techniques in educational system IJECS 2016
Computer Engineering Prof.Patkar U.C Online Examination System using Voice Recognition System IJESRT 2016
Computer Engineering Prof.Patkar U.C Phishing detection using visual cryptography IJIRSET 2016
Computer Engineering Prof.Patkar U.C An Intelligent Policy based Security using Software Defined Network Approach IJIRCCE 2016
Computer Engineering Prof.Chate P.J. A Digital Location based File Locker using Android Application IJIRCCE 2016
Computer Engineering Prof.Chate P.J. Prediction of stock market using Neural network for Increasing Accuracy IJIRCCE 2016
Computer Engineering Prof.Kadam Y.V. A framework to provide assured QoS by
increasing profit of cloud owner, Cloud service provider
IJIRCCE 2016
E&TC Engineering Prof. S. S. Gawhale IOT Based E-Voting System International Journal for Research in Applied Science & Engineering Technology 2016
E&TC Engineering Prof.L.P.Chaudhari INDUSTRIAL AUTOMATION AND SURVEILLANCE USING RASPBERRY PI International Journal of recent trends in engineering and reserch 2016
E&TC Engineering Prof.L.K.Wani IOT Based Hydroponic System International Journal of Innovative Research in Computer and Communication Engineering 2016
Mechanical Engineering Dr. S. M. Shendokar Synthesis of TiO2 Nanofibers for Solar
Cells and Their Analysis Using Statistical
Tool—ANOVA
Springer International Publishing 2016
Mechanical Engineering S. N. Kadam Taguchi Method International Journal of Scientific Research in Science, Engineering and Technology 2016
Mechanical Engineering D D Shinde Optimization Of Process Parameters For Machining Different Materials On CNC Machine review IJIERT 2016
Mechanical Engineering D D Shinde Design of Hydrostatic Power Transmission System of Heavy Duty Vehicle IARJSET 2016
Mechanical Engineering Kale S R Analysis and Optimization of Chain Conveyor Outer Link IJIRSET 2016
Mechanical Engineering S S Tambade Gearbox Rattling Noise IJITME 2016
Mechanical Engineering S R Kale Roller Chain Conveyor Link failure analysis and Optimization IERJ 2016
Mechanical Engineering A.B.Mane Addressing Trade-off in the expendables Encountered during Evaluation of the performance metrics of Electro Discharge machining IJIFR 2016
Applied Science Pradeep Atre Mn-doping effect on magnetic hysteresis of ZnO thin films prepared by wet chemical low temperature method International Journal of Innovative Knowledge Concepts 2017
Applied Science Dr.Nidhi Jain A Review On Acrlamide Based Hydrogel- Structural, Feature,Chemistry Synthyesis and Its Application International Journal of Engineering science invention (accepted) 2017
Civil Engineering 1) V D Sable
2) S S More
Expeimental Investigation on high strength steel fibre reinforced concrte with metakaolin ASIAN JOURNAL OF CIVIL ENGINEERING 2017
Civil Engineering 1) S C Mane
2) S T Rathod
3) D K Mokashi
Experimental investigation of shrinkage properties of blended cement concrete International Journal of Resarch in applied science & Engineering Technology 2017
Civil Engineering 1) S.C Mane
2) V D Sable
3) S. S More
Experimental study on light weight concrete made from partial replacement of coarse aggregate by waste polystrene International Journal of Resarch in applied science & Engineering Technology 2017
Civil Engineering D k Mokashi Effect of Wind pressure on circular building model in wind tunnel International journal of recent innovation in engineering and research 2017
Civil Engineering S T Rathod Effect of Wind pressure on circular building model in wind tunnel International journal of recent innovation in engineering and research 2017
Civil Engineering S T Rathod Utilization of bottles caps in Caps International Journal Engineering Research & Science 2017
Civil Engineering S C Mane Effect of Wind Pressure on Square Building Model International Journal of Modern Trends in Engineering & Research 2017
Civil Engineering U S Patil A review Study on Architecture of Hindu Temple International journal for Research & Development in Technology 2017
Computer Engineering Prof.Chate P.J. Tv show Popularity Prediction using Sentiment Analysis in Social Network IRJET 2017
Computer Engineering Prof.Chate P.J. The location based application providing customers with best offers IRJET 2017
Computer Engineering Prof.K.Bala Chat Boat for college management system using AI IRJET 2017
E&TC Engineering Prof.P.A.Yadav War Field Spying Robot with Wireless Night Vision Camera International Journal for Research in Applied Science and Engineering Technology 2017
E&TC Engineering Prof. S. S. Gawhale War Field Spying Robot with Wireless Night Vision Camera International Journal for Research in Applied Science and Engineering Technology 2017
E&TC Engineering Prof.L.P.Chaudhari War Field Spying Robot with Wireless Night Vision Camera International Journal for Research in Applied Science and Engineering Technology 2017
Mechanical Engineering A.B.Mane Surface Roughness Enhancement of Grinding process using compressed air in case of dry machining IJAR 2017
Applied Science P. P. Atre Effect of Temperature Variation in Synthesis of CuInS2 Thin Films Using Ultrasonic Spray Pyrolysis (USP) International Journal of Innovative Knowledge Concepts 2017
Applied Science P. P. Atre Phase Transformation from In2S3 to CuInS2 using Ultrasonic Spray Pyrolysis International Journal of Engineering, Science and Mathematics 2017

National / International Conferences

National/ International Conferences
Department Name of the Faculty Title of the paper Name of the conference National / international Year of publication
Mechanical Engineering Dr. S. M. Shendokar Comparative Study of Electrospun Nanofibers Vs E-Glass Microfibers Infused with Epon862/W Resin International conference International 2009-10
Mechanical Engineering Dr. S. M. Shendokar Modeling and Experimental Investigation on the Effect of Interlaminar Nanofiber Layers on the Delamination Behavior in a Epoxy Fiber Glass Composite 14th European Conference on Composite Materials International 2010-11
Mechanical Engineering Dr. S. M. Shendokar Low Cost Manufacturing of 1-D Nanostructures Using Electrospinning An International Conference on PRECISION, MESO, MICRO, AND NANO ENGINEERING International 2010-11
Mechanical Engineering Dr. S. M. Shendokar Effect of electrospun nanofibers on mechanical properties of Epon 862 – W The 18th Annual International Conference on COMPOSITES / NANO ENGINEERING - ICCE-18 Anchorage, Alaska, USA, International 2010-11
Mechanical Engineering Dr. S. M. Shendokar Effect of Interleaved Electrospun Nanofiber on Flexural Properties of Fiber Glass Composites ASME International Mechanical Engineering Congress and Exposition International 2010-11
Mechanical Engineering Dr. S. M. Shendokar Parametric Investigations on The Effect of Electrospinning Process Variables on The Macroscopic Properties of Hybrid Composites ASME International Mechanical Engineering Congress and Exposition International 2010-11
Mechanical Engineering Dr. S. M. Shendokar Influence of Electrospun Nanofibers on Interlaminar Performance of Glass Fiber Composites International Conference on Nanotechnology-Materials and Composites for Frontier Applications International 2010-11
Mechanical Engineering Dr. S. M. Shendokar Assessment of Electrospun Nanofiber Properties in Two Phase Composites International Conference on Nanotechnology-Materials and Composites for Frontier Applications International 2010-11
Mechanical Engineering Dr. S. M. Shendokar Application of Electrospun Nanofibers for the Improvements in Mode-I Fracture Toughness of Fiberglass Composites The International Conference on Nano Science, Engineering and Technology International 2011-12
Mechanical Engineering Dr. S. M. Shendokar Low Cost Manufacturing of 1-D Nanostructures Using Electrospinning An International Conference on PRECISION, MESO, MICRO, AND NANO ENGINEERING International 2011-12
Mechanical Engineering Dr. S. M. Shendokar Development and Analysis of ELectrospun Nanofibers for Filtration Applications Ist International Conference on Functional Materilas for Defense International 2011-12
Mechanical Engineering Prof S S Tambade Strategic Comutation modelling & analysis of Rattle Noise in Passanger Vehicle gear box Frontiers of Mechanical, Aeronautical and Automobile Engineering International 2012-13
Mechanical Engineering Prof. S.Y.Nagwase Experimental and CFD analysis of closed loop pulsating Heat Pipe with DI-Water International Conference on Energy efficient technologies for sustainability International 2012-13
Applied Science Hasarmani.T.S Wireless Power Transmission for Solar Power Satellite National conference on Advanced Electrical Engineering National 2013-14
Computer Engineering Prof.Chate p.J. User Oriented Approch to website Navigation Concept using mathematical Model ICST-2K14 International 2013-14
Mechanical Engineering Prof D D Shinde Solar Photo voltaic Applications In India Emerging trends in Electrical and Electronics Engineering National 2013-14
Civil Engineering S C Patil Use of Android tool in quality construction PGCON National 2014-15
Civil Engineering More S S "Signal free traffic junction" A planning Case study 4th International conference on Global Technology Initiatives International 2014-15
Computer Engineering Prof.Pawar P.D. Analysis & Implementation of AA Tress for CFS Scheduler International Conference on Convergence of Technology International 2014-15
Computer Engineering Prof.Kadam Y.V. A New Approach to Internet Traffic Analysis, Measurement, and Classification Using Hadoop cPGCON2014 National 2014-15
Mechanical Engineering Dr. S. M. Shendokar ANOVA - Electrospinning of Nylon 6 nanofibers with optimum of diameter. 3rd International Conference NANOCON 014 International 2014-15
Mechanical Engineering Dr. S. M. Shendokar Review- Parametric investigation of electrospun nanofiber 3rd International Conference NANOCON 014 International 2014-15
Mechanical Engineering Prof S R Kale Roller Chain Conveyor Link failure analysis and Optimization Recent Advances in mechanical Engineering National 2014-15
Mechanical Engineering Prof A M Pasarkar(Chaitanya) Effect of welding parameters on Nugget size of spot welding using Ansys Computational Mechanics and Simulation International 2014-15
Mechanical Engineering Prof. S.Y.Nagwase Heat Transfer analysis of closed loop pulsating Heat pipe using CFD International conference on Science and Technology International 2014-15
Civil Engineering More S S Signal Free Traffic at Intersection RIT NCon PG 2015 National 2015-16
Civil Engineering Dhamankar S S Adsorption of Fluoride using Cac and Determination of High Fluoride Content in Akola District world congress on applied science engineering and technology International 2015-16
Computer Engineering Prof.Patil A.R. NCPR Reducing path-Discovery overload in Mobile Adhoc network(MANET) EESCO-2015 International 2015-16
Computer Engineering Prof. Salunkhe P.P. Summarization and Hybrid Machine Translation System for English to Marathi: A Research Effort in Information Retrieval System (H-Machine Translation) International Conference on Computing,Communication, Electrical, Electronic Devices & Signal Processing International 2015-16
Computer Engineering Prof. Patil M.A. Integrity verification in mall cloud storage using co-operative provable data possession RACE Conference National 2015-16
Mechanical Engineering Prof.S.D.Dhamone Experimental Investigation on Crash Analysis of Automotive bumper by varying suitable input parameter in order to control energy absorption for improve passenger safety 2nd National conference on emerging trends in Chemistry and Material Science National 2015-16
Applied Science Dr. Nidhi Jain Make In India Water Crises: Minerals And Metal Contamination And Its Solution By Rain Water Harvesting- A Review National Seminar . Abhinavan-II Make In India Opportunities And Challenges National 2016-17
Computer Engineering Prof. Salunkhe P.P. Hybrid Machine Translation For English to Marathi:
A Research Evaluation In Machine Translation
ICEEOT 2016 International 2016-17
Computer Engineering Prof. Salunkhe P.P. A decision support engine:heuristic review analysis on information extraction system and mining comparable objects from comparable concepts(decision support engine) ICEEOT 2016 International 2016-17
Computer Engineering Prof. Pawar S.S. Image Re-Ranking semantic search Engine:Reinforcement learning methodology International conference IEEE International 2016-17
Computer Engineering Prof. Pawar S.S. Keyword search in information retrieval and relational database system:Two class view International conference IEEE International 2016-17
Computer Engineering Prof. Pawar S.S. Idea of intelligent Smart Research community development(Idea innovativation invention) International conference IEEE International 2016-17
Mechanical Engineering Prof.S.D.Dhamone Advance Robotics technology of automobile bumper by varying suitable input parameter in order to control energy absorption for improve passenger safety international Conference on Advances in Automation ,Robotics &Sensing International 2016-17
Civil Engineering V D Sabale
U S Patil
Critical Shear stree Analysis Hydro-2017 International 2017-18





Our Visitors

126550

Placements
© 2019 - Bharati Vidyapeeth, Pune. All rights reserved. Developed and maintained by Technology Department, Bharati Vidyapeeth.